TabletKiosk MediSlate™ i1040XT MCA Details Specifications
Hardware Specifications
- Processor
- Intel® Core™2 Solo ULV U2100
- 2 CPU Cores @ 1.06 GHz
- 32KB/32KB L1 cache, 1.0 MB unified L2 cache, 533 MHz FSB
- Intel® Virtualization Technology
- Enhanced Intel SpeedStep® Technology
- Chipsets
- Intel® 945 GME Express North Bridge with 533 MHz and 667 MHz FSB Support
- Intel® ICH7-M South Bridge with 10 GB/s full duplex DMI, PCI Express 1.0a
- ACPI 1.0b and 2.0 Compliant, supports C0-C4, S0, S3-S5 power states, Intel® SpeedStep® Technology
- Memory
- 1x SODIMM DDR2 (Unbuffered, 64-bits/channel) slot with 2.0 GB
- Supports Reduced Power DDR2 (RPDDR2)
- Intel® Rapid Memory Power Management
- Battery
- 2x Rechargeable 3-Cell Lithium Ion (3S1P) Smart Battery Packs (26W/hr / 11.1V / 2,400 mAh)
- Up to 4.5 hours run time (2.25 hrs per battery)
- Over Charge Protection, Over Discharge Protection, Over Current and Output Short Protection, Over Thermal Protection
- Hard Drive
- 1.8" SATA 150 MB/s
- 80 GB HDD (standard)
- 32 GB Solid State Drive (SSD Special Order only)
- Video
- Intel® GMA 950 PCI Express, 250 MHz Core Render Clock at 1.05V core
- Up to 224 MB of dynamically shared video RAM usable by Windows
- DirectX 9.1 Compatible, Intel® Dual Frequency Graphics Technology, Intel® Dynamic Video Memory Technology 3.0
- Intel® Smart 2D Display Technology, High Performance MPEG-2 Decoding, VLD/iDCT Hardware Acceleration
- Screen rotates 360° (0°, 90°, 180°, 270°)
- Resolutions supported up to 1024 x 768 Landscape, 768 x 1024 Portrait
- Accelerometer automatically rotates screen based upon system orientation
- Display
- 10.4" TFT XGA (1024 x 768) LCD Wide Angle Display
- Passive Resistive Touch Screen
- Anti-Glare Coating
- LED Backlight
- Rated Luminance: 165 nits (minimum), 240 nits (typical)
- Front panel ambient light sensor automatically adjusts screen brightness to maximize battery life
- G sensor automatically rotates screen between portrait and landscape depending on orientation of system
- Audio
- Intel® High Definition Audio Interface (ICH7-M)
- Independent Bus Master logic for eight (8) general purpose streams: four (4) input and four (4) output
- AC '97 Compatible
- HD Audio Codec (IDT 92HD71B5) with 4-channels (2x stereo DAC, 2x stereo ADC), 24-bit resolution
- Multichannel 32-bit, 44.1KHz/48KHz/96KHz/192KHz sampling rate output (DAC)
- Built-in 1W Speaker and Dual Digital Microphone Array for added fidelity and accuracy
- Wireless
- Intel® Pro 4965AGN 802.11 a/b/g/n (Draft 2.0) Networking
- Dual band (2.4 / 5.0 GHz)
- 802.11 d/e Quality of Service (QoS), 802.11h (Active Client Radar Detection) support
- 64-bit and 128-bit WEP Encryption, Hardware AES (128-bit, 192-bit, 256-bit key sizes), WPA, WPA2
- WPA2 AES Wi-Fi Protected Setup Support
- Supports IEEE 802.11 Power Save Protocol (PSP)
- Second-generation Intel and Cisco collaboration allows Access Points and clients to change settings based on real-time network conditions.
- Cisco Centralized Key Management, Call Admission Control, Unscheduled Automatic PowerSave Delivery (U-APSD), and Voice Metrics
- Bluetooth® 2.1+EDR built-in USB module with Power ON/OFF Button
- Optional 3G data module for WWAN capabilities
- Finger Print Reader
- Validity Sensors VFS131MD Fingerprint System Module
- USB 2.0 High Speed interface with Suspend and Remote Wake-up
Full Support for C3 Selective Suspend Mode
- 508 dpi swipe motion sensor
- Line-by-line Auto-Calibration for superior Image capture
- 10 Bit analog imaging for complete Grayscale
- High ESD immunity ±16Kv air discharge
- Built-in low power finger detection with Remote Wake-up capability
- TPM Security
- Single-Chip Trusted Platform Module (TPM)
- Embedded TPM 1.2 Firmware
- TPM Administration Tool provides Owners/Users Management and Key Archive Policies
- Trusted Group Computing (TCG) v1.1B / v1.2 configurable mode of operations
- RFID Reader
- Conforms to ISO 14443A and ISO 14443B and ISO 15693 protocol standard
- Full Mifare® functionality
- Read & write functionality
- High-speed transactions (9600 bps ~ 115200 bps)
- Encrypted data transfer
- 25mW output power
- Barcode Reader
- Intermec EA15 high-performance, decoded 2D imager (1D compatible)
- Omnidirectional bar code reading
- Scan rate of up to 200 scans per second in linear emulation mode or 56 scans per second in omnidirectional mode
- Low power 3.3V operation
- TTL RS-232 interface
- CMOS technology for optimal image sensitivity and dynamic range
- Fully compatible with Intermec’s family of decoded engines
- Digital Camera
- 2.0 MPixel (1,600 x 1,200)
- Auto Focus capability (from 7cm ~ infinity)
- Video capture supported
- I/O Ports
- 1x DC-In
- SIMM card slot on optional 3G Data Module
- 1x Docking Station Connector (Docking Station available separately)
- Power Management
- ACPI 1.0b and 2.0 Compliant
- ACPI S0, S3, S4, S5
- CPU States C0, C1, C2, C3, C4 states
- PCI Express Link States: L0, L0s, L1, L2, L3
- Rapid Power Management
- HSLPCPU# output
- DPWR# support
Physical Characteristics
- Weight
- 1.3 kg (2.9 lbs.) with Battery Pack Installed
- Measurements
- 10.63 in x 10.08 in x 1.39 in (270 mm x 256 mm x 35.34 mm)
- Color
- White with grey trim
- LED Indicators
- Power (ON: green, Standby: green blinking)
- Battery (Charging: red, Low: red blinking, Fully charged with DC connected: green)
- Wireless Networking (Active: green)
- RFID (Active: green)
- Function Buttons
- RFID Activate
- Barcode Reader Activate
- Bluetooth Transmitter
- Function Mode
- D-Stick with Volume Up/Down and Screen Brightness +/-
- Camera Activate
- 3x User Programmable
- SAS (Ctrl+Alt+Del) / Security Key
- Finger Print Reader
- Lead-Free 40 Ball Grid Array (BGA) Package
- Ultra-Hard Wearing Surface Coating is scratch and impact resistant
Rated for over 10 million rubs without degradation
- 0°C to +70°C Operating Temperature Range
- IEC 61000-4-2 Level 4 ESD Immunity (+/- 15KV)
- AC Adapter
- 100~240V, AC 47~63 Hz, 20V DC output, 3.25A, 65W adapter
- SCP: Short Circuit Protection plus Auto-Recovery Function
- OVP: Over-Voltage Protection, Latch Mode, up to 27.0Vdc maximum
- OCP: Over-Current Protection, Auto-Recovery, up to 5.5A maximum
- OTP: Over-Temperature Protection to prevent catastrophic failure from overheating.
- Operating Environment
- Temperature: 5°C ~ 35°C (41°F ~ 95°F)
- Humidity: 10% ~ 90%
Included in the Box
- Accessories:
- 2x Standard Lithium-Ion Battery Packs
- AC Adapter with Power Cord Set
- Tetherable Stylus
- Quick Start Guide
- System Recovery DVD or Disk Image
- Warranty:
- 1 Year Limited Warranty, Parts & Labor (Standard)